Connect with us

How To Flash CoolPad With CPB Firmware using YGDP Tool – Guide

flash coolpad

How To Flash CoolPad With CPB Firmware using YGDP Tool – Guide

Guide on How To Flash CPB Firmware Using YGDP Tool -THIS TUTORIAL IS For COOLPAD WITH FIRMWARE CPB EXTENSION.

These are the instructions on how to flash CPB firmware using YGDP Tool on any Android Device.

Requirements: Your Android device should have atleast 20-30 percent of battery to perform the Flashing Process. 

How to use YGDP Tool

 Download and install YGDP Tool on your computer.

Now, Open YGDP Flashing Tool (C:YLXZGJYGDPYGDP_Assembly.exe).

Once YGDP Flashing Tool is launched, you will be able to see the following screen:

Now, enter the Password 369 or 9527 and click on Login button.

Once you are able to see the main screen of YGDP Tool, then click on the Config button.

And add the CPB firmware (locate the CPB firmware that you want to flash on your android device):

Now, Click on the Apply button.

(installed).

Now, click on the Start Button to begin the flashing.

Once Flashing is completed you will be able to see green Upgrade Successful message.

Congratulations, Now your Android Device is successfully running the Stock Rom you have Downloaded.
tutorial how to make scatter file from YGDP Tool.

Guide on How To Flash CPB Firmware Using YGDP Tool -THIS TUTORIAL IS For COOLPAD WITH FIRMWARE CPB EXTENSION.

These are the instructions on how to flash CPB firmware using YGDP Tool on any Android Device.

Requirements: Your Android device should have atleast 20-30 percent of battery to perform the Flashing Process. 

How to use YGDP Tool

How To Flash CoolPad With CPB Firmware using YGDP Tool   Guide price in nigeria

 Download and install YGDP Tool on your computer.

Now, Open YGDP Flashing Tool (C:YLXZGJYGDPYGDP_Assembly.exe).

Once YGDP Flashing Tool is launched, you will be able to see the following screen:

How To Flash CoolPad With CPB Firmware using YGDP Tool   Guide price in nigeria

Now, enter the Password 369 or 9527 and click on Login button.

Once you are able to see the main screen of YGDP Tool, then click on the Config button.

And add the CPB firmware (locate the CPB firmware that you want to flash on your android device):

Now, Click on the Apply button.

(installed).

Now, click on the Start Button to begin the flashing.

Once Flashing is completed you will be able to see green Upgrade Successful message.

Congratulations, Now your Android Device is successfully running the Stock Rom you have Downloaded.
tutorial how to make scatter file from YGDP Tool.

Continue Reading
You may also like...
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

More in flash coolpad

To Top
%d bloggers like this: